Surface Engineering

The journal conforms to the ICMJE requirement that clinical trials are registered in a WHO-approved public trials registry at or before the time of first participant enrollment as a condition of consideration for publication. The trial registry name and URL, and registration number must be included at the end of the abstract.

Accepted file types

The preferred format for your manuscript is Word. You do not need to follow a template, but please ensure your heading levels are clear, and the sections clearly defined.

The LaTeX files are also accepted. A LaTeX template is available on the Sage Journal Author Gateway.

Your article title, keywords, and abstract all contribute to its position in search engine results, directly affecting the number of people who see your work. For details of what you can do to influence this, visit How to help readers find your article online.

Title

Your manuscript’s title should be concise, descriptive, unambiguous, accurate, and reflect the precise contents of the manuscript. A descriptive title that includes the topic of the manuscript makes an article more findable in the major indexing services.

Important Information

1. Titles must not exceed 10 words. The title, abstract and keywords should include the key concepts likely to be used as search term. 

2. Please make sure that your paper is arranged with the following section headings - abstract, key words, introduction, materials and methods, results and discussion, conclusions and then references followed by Figures and Tables.

3. Your paper must have a significant focus on coatings and cannot be mere modelling or properties as it will be rejected. Conclusions must be comprehensive and should clearly indicate the industrial value/relevance for the approaches described in your paper.

4. You should clearly state within the introduction the novelty of the work, how it differs from previous studies, and how it will add to the literature.

5. Mechanisms must be clearly stated for the phenomena observed in the discussion section and must not be empirical.

6. Please ensure that all references are formatted according to guidelines.

7. Your paper must not exceed 20 typed pages including figures, so please remove unnecessary figures.

8. Please use arrows or circles to draw attention to specific figure features as necessary.

9. All line drawings must be black and white only and should use dots or dashes for different lines.

10. Figures should be submitted in high resolution.

11. All lettering must be 11 pt times roman or higher for easy reading.

12. To maintain a current list of reviewers for Surface Engineering please submit a list of 5 active researchers in the field, along with email addresses and affiliation. Please do not suggest friends or colleagues. Note that these researchers will not will not be invited to comment on your submission but will added to the journal’s pool of reviewers for use on other manuscripts. Please email your list to [email protected].

13. You must ensure that all relevant publications are appropriately cited. The journal encourages authors to search and utilise a wide variety of databases to make sure that all past work that is relevant to the study is properly referred to and not resourced from a single database. It is important that the literature is reviewed to the most recent point so as to be considered current.

Abstract

Please include a unstructured abstract between the title and main body of your manuscript that concisely states the purpose of the research, major findings, and conclusions. If your research includes clinical trials, the trial registry name and URL, and registration number must be included at the end of the abstract. Submissions that do not meet this requirement will not be considered.

For clinical trials, the trial registry name and URL, and registration number must be included at the end of the abstract.

Keywords

Please include a maximum of 8 keywords, listed after the abstract. Keywords should be as specific as possible to the research topic.

Artwork, figures, and other graphics

For guidance on the preparation of illustrations, pictures, and graphs in electronic format, please read Sage’s artwork guidelines.

Figures supplied in color will appear in color online regardless of whether or not these illustrations are reproduced in color in the printed version. If you have requested color reproduction in the print version, we will advise you of the costs on receipt of your accepted article.

Please ensure that you have obtained any necessary permission from copyright holders for reproducing any illustrations, tables, figures, or lengthy quotations previously published elsewhere. For further information including guidance on fair dealing for criticism and review, please see the Frequently Asked Questions page on the Sage Journal Author Gateway.

Title page

To ensure fair and anonymous peer review, your manuscript must be fully anonymized. Please ensure any identifying information is removed from the main manuscript document and included on the Title Page instead. Do not include any author names in the manuscript file name and remove names from headers and footers. This version of the manuscript will be sent to the peer reviewers. The Title Page will not be sent to peer reviewers. See the Sage Journal Author Gateway for detailed guidance on making an anonymous submission.

The Title Page should include:

• Article title
• The full list of authors including names and affiliations of each
• The listed affiliation should be the institution where the research was conducted. If an author has moved to a new institution since completing the research, the new affiliation can be included in a note at the end of the manuscript – please indicate this on the title page.
• All persons eligible for authorship must be included at the time of submission (please see the authorship section for more information).
• Contact information for the corresponding author: name, institutional address, phone, email
• Acknowledgments section
• Declaration of conflicting interest
• Funding statement
• Ethical approval and informed consent statements
• Data availability statement
• Any other identifying information related to the authors and/or their institutions, funders, approval committees, etc, that might compromise anonymity.

Acknowledgments

If you are including an Acknowledgements section, this will be published at the end of your article. The Acknowledgments section should include all contributors who do not meet the criteria for authorship. Per ICMJE recommendations, it is best practice to obtain consent from non-author contributors who you are acknowledging in your manuscript.

Writing assistance and third party submissions: if you have received any writing or editing assistance from a third-party, for example a specialist communications company, this must be clearly stated in the Acknowledgements section and in the covering letter. Please see the Sage Author Gateway for what information to include in your Acknowledgements section. If your submission is being made on your behalf by someone who is not listed as an author, for example the third-party who provided writing/editing assistance, you must state this in the Acknowledgements and also in your covering letter. Please note that the journal editor reserves the right to not consider submissions made by a third party rather than by the author/s themselves.

Author contributions

As part of our commitment to ensuring an ethical, transparent and fair peer review and publication process, this journal has adopted CRediT (Contributor Roles Taxonomy). CRediT is a high-level taxonomy, including 14 roles, which is used to describe each author’s individual contributions to the work.

You will be asked to list the contribution of each author as part of the submission process. Please include the Author Contributions heading within your submission after the Acknowledgements section. The information you give on submission will then show under the Author Contributions heading later at the proofing stage. For more information, please see our CRediT Gateway page.

Statements and declarations

To ensure proper anonymization, please include a section with the heading ‘Statements and Declarations’ on your title page, after the Acknowledgements section [and Author Contributions section if applicable] including each of the sub-headings listed below. If a declaration is not applicable to your submission, you must still include the heading and state ‘Not applicable’ underneath. Please note that you may be asked to justify why a declaration was not applicable to your submission by the Editorial Office. This information will be added to the end of your published paper.

Ethical considerations

Please include your ethics approval statements under this heading, even if you have already included ethics approval information in your methods section. If ethical approval was not required, you need to explicitly state this. You can find information on what to say in your ethical statements as well as example statements on our Publication ethics and research integrity policies page.

All papers reporting studies involving human participants, human data or human tissue must state that the relevant Ethics Committee or Institutional Review Board approved the study, or waived the requirement for approval, providing the full name and institution of the review committee in addition to the approval number. If applicable, please also include this information in the Methods section of your manuscript.

Consent to participate

Please include any participant consent information under this heading and state whether informed consent to participate was written or verbal. If the requirement for informed consent to participate has been waived by the relevant Ethics Committee or Institutional Review Board (i.e. where it has been deemed that consent would be impossible or impracticable to obtain), please state this. If this is not applicable to your manuscript, please state ‘Not applicable’ in this section. More information and example statements can be found on our Publication ethics and research integrity policies page.

Consent for publication

Submissions containing any data from an individual person (including individual details, images or videos) must include a statement confirming that informed consent for publication was provided by the participant(s) or a legally authorized representative. Non-essential identifying details should be omitted. Please do not submit the participant’s actual written informed consent with your article, as this in itself breaches the patient’s confidentiality. The Journal requests that you confirm to us, in writing, that you have obtained written informed consent to publish but the written consent itself should be held by the authors/investigators themselves, for example in a patient’s hospital record. The confirmatory letter may be uploaded with your submission as a separate file in addition to the statement confirming that consent to publish was obtained within the manuscript text. If this is not applicable to your manuscript, please state ‘Not applicable’ in this section.

Declaration of conflicting interest

The journal requires a declaration of conflicting interests from all authors so that a statement can be included in your article. For guidance on conflict of interest statements, see our policy on conflicting interest declarations and the ICMJE recommendations.

If no conflict exists, your statement should read: ‘The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article’.

Funding statement

All articles need to include a funding statement, under a separate heading, even if you did not receive funding. You’ll find guidance and examples on our Funding page.

Reference style and citations

The journal follows the Sage Vancouver reference style. View the Sage Vancouver guidelines to ensure your manuscript conforms.

Every in-text citation must have a corresponding citation in the reference list and vice versa. Corresponding citations must have identical spelling and year.

Authors should update any references to preprints when a peer reviewed version is made available, to cite the published research. Citations to preprints are otherwise discouraged.

EndNote

If you use EndNote to manage references, you can download the Sage Vancouver EndNote output file.

Supplemental material

This Journal can host additional materials online (e.g. datasets, podcasts, videos, images etc.) alongside the full text of the article. Your supplemental material must be one of our accepted file types. For that list and more information please refer to our guidelines on submitting supplemental files.

English language editing services

Authors seeking assistance with English language editing, translation, or figure and manuscript formatting to fit the journal’s specifications should consider using Sage Author Services. Visit Sage Author Services for further information.

The journal will consider submissions of manuscripts that have been posted on preprint servers.

Please enter the preprint DOI in the designated field when submitting your manuscript. We advise that you inform the Journal Editorial office about your posted preprint at submission.

Note that you should not post an updated version of your manuscript on a preprint server while it is being peer reviewed.

Learn more about our preprint policy.

• ORCID ID of the submitting author.
  • It is strongly encouraged that all co-authors ensure their ORCID IDs are linked to their accounts in the submission system prior to article acceptance, as this is the only way to have their ORCID ID present on the published article. ORCID IDs cannot be added to manuscripts after acceptance/publication. Please note that each co-author must log in to the submission system to add their own ORCID ID to their account. To add an ORCID ID, edit your account, click the link when prompted, and sign into your ORCID account to validate your ID. You will then be redirected back to the submission system and your ORCID ID will become part of your accepted publication’s metadata.
  • Please create an ORCID ID if you do not already have one or visit our ORCID homepage to learn more.